TABLE CONTINUED ▶
①
Total maximum continuous power is 12 watts. This is the available
power for all communication equipment installed in the switch control. A
maximum peak transmit of 27 watts for up to 250 milliseconds is allowed,
but the average power draw must not exceed 12 watts, including a trans-
mission peak.
Refer to the nearest S&C Sales Office if more than one communication
device is to be installed in the control.
★
Specify the appropriate catalog number suffix based on the frequency
band range and application for the radio, from the following table. For
example, for a 928- to 960-MHz MDS SD9 Radio for Ethernet and Serial
application, specify Catalog Number Suffix “-R216CL.”
Frequency Band Range, MHz Application
Suffix to be Added
to Catalog Number
820 to 870
Serial
-R216AK
928 to 960 -R216CK
928 to 960, 50-kHz Channel -R216DK
880 to 915 -R216EK
880 to 915, 50-kHz Channel -R216FK
850 to 860 / 926 to 936,
Transmit Low
-R216GK
850 to 860 / 926 to 936,
Transmit High
-R216HK
Frequency Band Range, MHz Application
Suffix to be Added
to Catalog Number
820 to 870
Ethernet and
Serial
-R216AL
928 to 960 -R216CL
928 to 960, 50-kHz Channel -R216DL
880 to 915 -R216EL
880 to 915, 50-kHz Channel -R216FL
850 to 860 / 926 to 936,
Transmit Low
-R216GL
850 to 860 / 926 to 936,
Transmit High
-R216HL
820 to 870
9710 Emulation
-R216AM
928 to 960 -R216CM
928 to 960, 50-kHz Channel -R216DM
880 to 915 -R216EM
880 to 915, 50-kHz Channel -R216FM
850 to 860 / 926 to 936,
Transmit Low
-R216GM
850 to 860 / 926 to 936,
Transmit High
-R216HM
Options
Item
Suffix to Be Added to
Switch Control
Catalog Number
WiFi Module with Antenna -A1
Sensing Inputs (sensors not included)
Three S&C Current/Voltage Sensors -K1
Three Lindsey Current and Voltage Sensors -K5
One Potential Transformer and Three 1000:1 Current Transformers -K8
Three S&C Current Sensors and Six S&C Voltage Sensors -K9
Indicator Option
Reversed Colors for Open/Closed Indicating Lamps (green = closed, red = open) -L1
Communication Protocol
DNP 3.0 -P0
IntelliTeam SG, IntelliTeam II, and SCADA Communication Device and Mounting (furnished by S&C, requires Suffix “-R98” on page 5)
①
SpeedNet™ SDR 4 Radio -R254
SpeedNet SDR 4x4 Radio -R256
RuggedCom RS900 Single-Mode Fiber-Optic Modem. Includes ST connectors -R164
RuggedCom RS900 Multi-Mode Fiber-Optic Modem. Includes ST connectors
-R165
Single-Mode Dymec 5843SHRT Fiber-Optic Modem
-R44
Multi-Mode Dymec 5843HRT Fiber-Optic Modem -R45
SpeedNet™ Radio
-R80
IntelliCom
®
DA Mesh Radio
-R201
IntelliCom DA Mesh Radio Enabled for Dual-Radio Operation. Requires Suffix “-S12”
-R203
IntelliTeam II, and SCADA Communication Device and Mounting (furnished by S&C, requires Suffix “-R98”)
①
Internal UtiliNet Series IV IWR Radio
-R67
SCADA Communication Device and Mounting (furnished by S&C, requires Suffix “-R98”)
①
SpeedNet™ ME Mesh End-Point Radio -R240
MDS TransNET 900 Transceiver with Diagnostics
-R19
MDS NR104L IP Radio. Includes serial to ethernet device server
-R71
Telemetric DNP-RTMII-GSM Transceiver
-R161
MDS SD9 Remote Radio
★
S&C 6801 Automatic Switch Controls
S&C Specication Bulletin 1045-31 5
(12 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales